Axis BTA 2100D Manuel de l'opérateur télécharger pdf (Page 295)

100

101

293

PFPD Detector

If you indicate that a PFPD Detector is installed, an Oven Power switch, an

Electronics switch, Square Root Mode switch, and a Temperature setting will

appear in the top portion of the window, and additional detector adjustments will

appear below the spreadsheet.

If you indicate that an PFPD Detector is to be turned on and heated, select the

desired Temperature setting.

Indicate whether you will use the installed Detector Oven and Electronics by

clicking on the “On” or “Off” radio buttons.

Enable or disable Square Root Mode.

You can time-program the detector range and autozero in the spreadsheet.

Select the desired PFPD Photomultiplier Voltage, Gate Delay, Gate Width, and

Trigger Level from the available choices.

Select the desired gas flow rates.

The first row of the spreadsheet contains the Initial Range and Autozero for the

PFPD Detector. The PFPD will switch to this setting when the method is

activated, and will be restored to this setting when each chromatographic run is

completed.

Rows after the first row of the spreadsheet contain the time-programmed settings

for the Range and Autozero. They will be switched to the value in each row at the

indicated time.

1 2 ... 290 291 292 293 294 295 296 297 298 299 300 ... 596 597

Commentaires sur ces manuels

Pas de commentaire

Axis BTA 2100D Manuel de l'opérateur Page 295

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Axis BTA 2100D