Axis 292 Manuel d'utilisateur télécharger pdf (Page 2)

AXIS COMMUNICATIONS

<Product Name> Quick User’s Guide

About This Document

This manual is intended for administrators and users of the

AXIS 292 Network Video Decoder, and is applicable for

software release 4.00. It includes instructions for installing,

using and managing the AXIS 292 on your network.

Previous experience of networking will be of use when

installing and using this product. Later versions of this

document will be posted to the Axis Website, as required.

See also the product’s online help, available via the

Web-based interface.

Safety Notices Used In This Manual

Caution! - Indicates a potential hazard that can damage the

product.

Important! - Indicates a hazard that can seriously impair

operation.

Do not proceed beyond any of the above notices until you

have fully understood the implications.

Intellectual Property Rights

Axis AB has intellectual property rights relating to

technology embodied in the product described in this

document. In particular, and without limitation, these

intellectual property rights may include one or more of the

patents listed at http://www.axis.com/patent.htm and one

or more additional patents or pending patent applications

in the US and other countries.

Legal Considerations

Camera surveillance can be prohibited by laws that vary

from country to country. Check the laws in your local

region before using this product for surveillance purposes.

Electromagnetic Compatibility (EMC)

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation.

If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures: Re-orient or relocate the receiving antenna.

Increase the separation between the equipment and

receiver. Connect the equipment to an outlet on a different

circuit to the receiver. Consult your dealer or an

experienced radio/TV technician for help. Shielded (STP)

network cables must be used with this unit to ensure

compliance with EMC standards.

USA - This equipment has been tested and found to

comply with the limits for a Class B computing device

pursuant to Subpart B of Part 15 of FCC rules, which are

designed to provide reasonable protection against such

interference when operated in a commercial environment.

Operation of this equipment in a residential area is likely to

cause interference, in which case the user at his/her own

expense will be required to take whatever measures may be

required to correct the interference.

Europe - This digital equipment fulfills the

requirements for radiated emission according to limit B of

EN55022/1998, and the requirements for immunity

according to EN55024/1998 residential, commercial, and

light industry.

Liability

Every care has been taken in the preparation of this manual;

Please inform your local Axis office of any inaccuracies or

omissions. Axis Communications AB cannot be held responsible

for any technical or typographical errors and reserves the right

to make changes to the product and manuals without prior

notice. Axis Communications AB makes no warranty of any

kind with regard to the material contained within this

document, including, but not limited to, the implied warranties

of merchantability and fitness for a particular purpose. Axis

Communications AB shall not be liable nor responsible for

incidental or consequential damages in connection with the

furnishing, performance or use of this material.

Trademark Acknowledgments

Acrobat, Adobe, Boa, Ethernet, IBM, Internet Explorer, LAN

Manager, Linux, Macintosh, Microsoft, Mozilla, Netscape

Navigator, OS/2, UNIX, Windows, WWW are registered

trademarks of the respective holders. Java and all Java-based

trademarks and logos are trademarks or registered trademarks

of Sun Microsystems, Inc. in the United States and other

countries. Axis Communications AB is independent of Sun

Microsystems Inc.

Support Services

Should you require any technical assistance, please contact

your Axis reseller. If your questions cannot be answered

immediately, your reseller will forward your queries through

the appropriate channels to ensure a rapid response. If you are

connected to the Internet, you can:

• download user documentation and firmware updates

• find answers to resolved problems in the FAQ database.

Search by product, category, or phrases

• report problems to Axis support staff by logging in to your

private support area

• visit the Axis Support Web at www.axis.com/techsup/

AXIS 292 User’s Manual Revision 1.00

Dated: May 2004 Part No: 21985

1 2 3 4 5 6 7 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Axis 292 Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Serveurs vidéo/encodeurs Axis 292