Axis 292 Manuel d'utilisateur télécharger pdf (Page 19)

AXIS 292 - Network - TCP/IP

Network - TCP/IP

This section lists and describes the tools for configuring the TCP/IP network settings on the

AXIS 292.

The product cannot be configured before it is installed. If you have not yet completed the

installation, please refer to

Installing the AXIS 292, on page 9.

TCP/IP Network Settings

If a DHCP server is available on the network, you can allow this to assign IP address, DNS

server address and host names to the AXIS 292. To see the current settings, press the View

buttons to the right of each DHCP radio button. The network settings can also be

configured manually as follows:

IP Address Configuration

IP Address - A unique IP address for your server is required to establish communication

with your network. Written as four numbers separated by periods, each number within the

address must be in the range 0 - 255. For example: 192.168.1.90. Click the Test button to

verify that the address is available.

Subnet Mask - The subnet mask for the subnet the AXIS 292 is located on. In most cases the

value 255.255.255.0 will work well.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 51 52

Pas de commentaire

Axis 292 Manuel d'utilisateur Page 19