Axis 292 Manuel d'utilisateur télécharger pdf (Page 10)

AXIS 292 - Installing the AXIS 292

Automatic Installation using DHCP

DHCP is enabled by default on the AXIS 292. If a DHCP server is available, follow these

instructions to install the AXIS 292 using DHCP.

1. Connect a standard RJ-45 network cable to the AXIS 292 and connect it to the

network.

2. Connect an external monitor to one of the video outputs.

3. Connect power to the AXIS 292.

4. The IP address will be displayed on the TV monitor during startup.

5. Start a Web browser and enter the IP address in the Address/Location field.

6. Press Enter.

7. Enter the password for the root user (administrator).

8. The installation is now complete. Proceed to Accessing the network video decoder,

on page 14.

Notes: If the monitor displays the default IP address (192.168.0.90), DHCP probably failed. In this case, please

proceed to one of the manual installation procedures on the following pages.

The default password when the product is shipped is pass. This password may have been changed by the

administrator at a previous installation. Refer to Troubleshooting, on page 25 for instructions on how to

restore the AXIS 292 to the default settings.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 51 52

Pas de commentaire

Axis 292 Manuel d'utilisateur Page 10