Axis P3304 Manuel d'utilisateur télécharger pdf (Page 38)

AXIS P3304/-V - System Options

RTP/H.264

These settings are the port range, IP address, port number (video and audio), and Time-To-Live value to use for the video

stream(s) in multicast H.264 format. Only certain IP addresses and port numbers should be used for multicast streams. For

more information, see the online help.

Bonjour

The network camera includes support for Bonjour. When enabled, the camera is automatically detected by operating systems

and clients that support this.

Ports & Devices

I/O Ports - the pinout, interface support and the control and monitoring functions provided by this connector are described in

The I/O Terminal Connector, on page 41.

LED Settings

The Status indicator LED on the front of the camera can be set to flash at a configurable interval (or to not light up at all)

when the unit is accessed. For a listing of all LED behavior, see page 6, or the online help. Note that

the LED does not flash

when the stream is retrieved using H.264 multicast.

Maintenance

Restart - the camera is restarted without changing any settings.

Restore

- the unit is restarted and most current settings are reset to factory default values. The settings that do not reset are:

• the boot protocol (DHCP or static)

• the static IP address

• the default router

•the subnet mask

• the system time

Default

- the default button should be used with caution. Pressing this returns the camera's settings to the factory default

values (including the IP address).

Upgrade Server - See Upgrading the Firmware, on

page 43.

Support

Support Overview

The Support Overview page provides valuable information on troubleshooting and contact information, should you require

technical assistance.

System Overview

System Overview provides an overview of the camera’s status and settings. Information that can be found here includes the

camera’s firmware version, IP address, security, event and image settings and recent log items. Many of the captions are also

links to the proper Setup page to conveniently make adjustments in the camera’s settings.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 57 58

Pas de commentaire

Axis P3304 Manuel d'utilisateur Page 38