Axis P3304 Manuel d'utilisateur télécharger pdf (Page 11)

AXIS P3304/-V - The Live View page

Pan/Tilt/Zoom controls

The following controls are available if PTZ is enabled go to Video & Audio > View Area, and see View Area, on page 17. The

administrator can enable and disable the controls for specific users under System Options > Security > Users > User List.

Half-duplex mode

The Ta

lk/Listen button is used to switch between sending and receiving audio. The button can be config-

ured from the Audio tab in the AMC Control panel:

•Push-To-Talk mode: Click and hold the button to talk/send, rel

ease the button to listen.

•Toggle mode: Click once to switch between talking and listening.

Simplex – Network Camera speaker only mode

To send audio, the Talk and Microphone buttons must both

be enabled. Click either button to stop audio

transmission.

Click the Emu

late joystick mode button and click in the image to move the camera view in the direction of the

mouse pointer.

Click the Cent

er mode button and click on a position in the image to center the camera view on that position.

Pan, Tilt and Zoom bars — Clicking a position directly on the bar moves the camera view directly to the new posi-

tion in one smooth movement. Clicking on the arrows at the ends of a bar

causes an incremental change. Clicking

Zoom out to overview image will set the camera to the minimum zoom position. In this position, the camera

cannot pan or tilt.

Click the Ct

rl panel button to open the PTZ control panel which provides additional PTZ controls.

User-defined buttons can also appear in the Control panel, see Advanced, on page 23.

Click the Home button to steer the camera to the Home position. The Home position is defined under

Setup > PTZ> Preset Positions.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 57 58

Pas de commentaire

Axis P3304 Manuel d'utilisateur Page 11