Axis 640 series Guide d'installation télécharger pdf (Page 9)

7. Select the Windows port name defined in step 4 above that

should now feature at the bottom of the Ports list.

8. Click OK to close the Connect dialog, and Close to close

Printers.

The setup is completed and you can now print through your

AXIS 540/640.

Important notes:

❏ Windows 3.1 will require network support such as LAN Server

or LAN Manager Workstation software to be installed in order

to redirect a local printer port to a network device.

❏ AXIS Print Utility for Windows must be running when you

print through your AXIS 540/640. We strongly recommend that

you copy the AXIS Print Utility icon into your StartUp file.

Windows Clients using LANtastic

From any Windows client, the AXIS 540/640 may also be used for

network printing within LANtastic environments. Your choice of

Axis utility software should be guided by type of Windows client

employed. Simply refer to the appropriate Windows Section for your

client, above. Please ensure that your LANtastic client is running the

desired printing protocol.

OS/2

Firstly, ensure that the NetBEUI protocol is active. If necessary, use

MPTS/LAPS (LAN Server) or SETUP (LAN Manager) to activate

it.

Load AXIS Print Utility for OS/2 and Install your AXIS 540/640:

1. Insert the Print Utilities for OS/2 disk into your disk drive, and

open an OS/2 window. Execute the install.exe program

2. With the AXIS Print Utility running, install your AXIS 540/640

by clicking Install

. The ports appear as <name>.LP1, where

<name> is AX followed by last six digits of the AXIS 540/640

serial number. For example: AX540B35.LP1. Note that this

alphanumeric name will be superseded by any new name given to

your AXIS 540/640 when using AXIS NetPilot™.

3. Select the ports you want to install, then click Install.

Repeat this procedure for each server using the AXIS 540/640.

1 2 3 4 5 6 7 8 9 10 11

Pas de commentaire

Axis 640 series Guide d'installation Page 9