Axis 640 series Guide d'installation Page 6

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 11
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 5
3. A new ‘Network environments’ window will now be open.
From this window you may create new print queues, connect to
previously established queues, and/or select the mode of
operation (Print Server or Remote Printer) for each printer.
To set up the advanced operating parameters:
1. Open the ‘Network Print Servers’ folder and select the Network
Print Server you wish to set-up.
2. Choose ‘Properties’ from the Toolbar or Setup menu.
3. A set of “tabbed” Property Pages will open which allow you to
refine the chosen mode of operation, e.g. password protection,
frame type selection and/or setting of the queue polling interval.
The NetWare Configuration is now complete.
To verify that the AXIS 540/640 is functioning correctly, we
recommend that you print a document from within a Windows
application, e.g. Microsoft Word. Please ensure that your printer is
selected as the Active Printer!
UNIX
Please note that UNIX root privileges, or administrator privileges on
a Windows NT server are required for this configuration procedure.
1. Acquire an unused Internet address from your Network
Administrator and choose a unique name for the AXIS 540/640.
2. Add your AXIS 540/640 Internet address and host name to your
system host table by appending the following line to the
/etc/hosts file:
Example:
192.36.253.96 salesdept
3. Update your alias name databases (YP/NIS).
4. Perform the following commands to download the Internet
Address and verify correct Internet communication:
AXIS 540/542 Ethernet Print Servers:
Example for Ethernet:
arp -s salesdept 00:40:8c:10:00:86 temp
ping salesdept
AXIS 640/642 Token Ring Print Server:
Example for Token Ring:
arp -s 802.5 salesdept 00:02:31:48:00:61 temp
ping salesdept
<Internet address> <host name>
arp -s <host name> <Ethernet or node address> temp
ping <host name>
arp -s 802.5 <host name> <Ethernet or node address>
temp
ping <host name>
Vue de la page 5
1 2 3 4 5 6 7 8 9 10 11

Commentaires sur ces manuels

Pas de commentaire