Axis 5500 Guide de l'utilisateur télécharger pdf (Page 9)

AXIS 5500/AXIS 5550 User’s Guide

1. Connect the Hardware

1. Make sure that the printer is switched off and that the Power Adapter is disconnected from

the print server.

2. Locate the serial number, found on the underside label of the print server, and write it down.

Example: S/N: 00408c181636

3. Connect the printer to a port on the print server using an appropriate cable.

4. Connect the AXIS 5500/AXIS 5550 to your network (Ethernet Connector), using a twisted pair

category 5 cable.

5. Switch on the printer and make sure it is ready for use.

6. Connect the Power Adapter to the print server. The Network Indicator will start flashing when

the print server is correctly connected to the network.

7. Wait 1 minute and press the test button once. A test page will be printed on the connected printer

— keep it handy during the installation. The test page will show the assigned (static or dynamic)

IP address of the print server.

Note:

If you are installing an AXIS 5550 and have printers connected to both ports, the default setting will send the test

page to the parallel printer.

English

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 132 133

Pas de commentaire

Axis 5500 Guide de l'utilisateur Page 9