Axis 0210-011 Fiche technique télécharger pdf (Page 39)

Axis video server - Pan Tilt Zoom

Note: Advanced users and application developers can also use the Axis Application Programming Interface and

HTTP specification for generic control of PTZ devices using CGI commands or a TCP/IP client. Please refer to

the Axis Website at www.axis.com for further information.

PTZ configuration

Once PTZ has been installed for the Axis video server, PTZ Configuration now appears in

the menu to the left along with the following sub menus.

Preset positions

A preset position is a pre-defined camera view than can be used to quickly move the

camera to a specific location.

From Preset Position Setup, use the Pan, Tilt and Zoom (PTZ) controls to steer the camera

to the required position. When satisfied with the camera's position, enter a descriptive

name. The camera position, iris and focus settings are then saved as a preset position.

The position can be assumed at any time, by selecting the preset's name from the Preset

positions drop-down list. Preset positions can be selected in Live View, from events and in

Sequence mode.

One position can be set as the Home position, which is readily accessible by clicking in the

box beside Use current position as Home. The position's name will then have (H) added to

the end, e.g. Office Entrance (H).

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 83 84

Pas de commentaire

Axis 0210-011 Fiche technique Page 39