Axis 0210-011 Fiche technique télécharger pdf (Page 34)

Axis video server - Event configuration

Event types

An event type is a set of

parameters describing how

and when the video server

is to perform certain

actions.

Example: If somebody walks past

the connected camera, and an event

has been configured to act on this,

the video server can e.g. record and

send video images to an FTP server, or send a notification email to a pre-configured email address with a pre-con

figured message. Video images can be sent as an attachment with the email.

Triggered Event

A triggered event is activated by e.g:

• a pushbutton connected to an input port on the video server

• detected movement in a configured motion detection window

• a lost signal from a video source

• a manual action e.g. clicking the trigger button in the web interface

• on restart (reboot) after e.g. power loss

How to set up a triggered event

This example describes how to set the Axis video server to upload images when the main

door is opened:

1. Click Add triggered on the Event types page.

2. Enter a descriptive name for the event, e.g. Main door.

3. Set the priority - High, Normal or Low (see online help files).

4. Select the Video Source the event is to act on, e.g. Video 1 on Main door (AXIS

241Q/QA only).

5. Set the Respond to Trigger... parameters when the event is to be active,

e.g. only after office hours

6. Select the trigger alternative from the Triggered by... drop-down list,

e.g. an Input port with a connected sensor if the door is opened.

7. Set the When Triggered... parameters, i.e. set what the video server should do if

the main door is opened, e.g. upload images to an FTP server.

8. Click OK to save the event in the Event Types list.

Please see the online help for descriptions of each available option.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 83 84

Pas de commentaire

Axis 0210-011 Fiche technique Page 34