Axis Q6032-E Manuel d'utilisateur télécharger pdf (Page 6)

AXIS Q6032-E - Product Description

Power button - Press the button to temporarily power camera when dome cover is removed. The power button is also used

with the control button to restore the camera to factory default settings, see

Resetting to the Factory Default Settings,

page 38.

Serial number label - Part number (P/N) and Serial number (S/N). The serial

number may be required during installation.

SDHC Memory card slot - A standard or high capacity SD memory card (not

included) can be used for local recording with

removable storage. To insert and remove an SD card, the camera’s top cover must first be removed; for instructions please

refer to the Installation Guide.

Note:

Bef

ore removal, the SD card should be unmounted to prevent corruption of recordings. To unmount the SD card, go to

Setup > System Options > Storage > SD Card and click Unmount.

Status Indicators

After the startup and self test routines the indicators flash as follows.

See also

LED Indicator flash routine,

on page 43.

Unit Color Indication

AXIS Q6032-E Unlit Steady connection/normal operation

Amber Steady for system initiating. Flashes dur

ing firmware upgrade or reset to

factory default.

Amber/red No network connection

Red Firmware upgrade failure

Green Steady for 10 sec. after successful restart

Unit LED Color Indication

AXIS T8124 Port Unlit No camera connected

Amber Insufficient power for camera and heater. Check cable

Flashing Power overload

Green Camera connected, normal behavior

AC input Steady green AC power connected

1 2 3 4 5 6 7 8 9 10 11 ... 53 54

Pas de commentaire

Axis Q6032-E Manuel d'utilisateur Page 6