Axis Q6032-E Manuel d'utilisateur télécharger pdf (Page 31)

AXIS Q6032-E - System Options

Date & Time

Current Server Time

Displays the current date and time (24h clock). The time

can be displayed in 12h clock format in the overlay (see below).

New Server Time

Select your ti

me zone from the drop-down list. If you want the server clock to automatically adjust for daylight savings time,

select the Automatically adjust for daylight saving time changes option.

From the Time Mo

de section, select the preferred method to use for setting the time:

• Synchronize with computer time - Sets the time from the clock on your computer.

• Synchronize with NTP Server - The camera will obtain the time from an NTP server every 60 minutes.

• Set manually - This option allows you to manually set the time and date.

Note:

If using a host name for the NTP server, a DNS server must be configured under TCP/IP settings.

See

Basic TCP/IP Settings

, below.

Date & Time Format Used in Images

Specify the formats for the date and time (12h or 24h) displayed in th

e video streams. Use the predefined formats or use your

own custom date and time formats. See Advanced File Naming & Date/Time Formats in the online help for information

on how to create your own date and time formats.

Network

Basic TCP/IP Settings

AXIS Q6032-E supports both IP version 4 and IP version 6. Both versions may be enabled simultaneously, and at least one

version must always be enabled. When using IPv4, the IP address for the camera can be set automatically via DHCP, or a static

IP address can be set manually. If IPv6 is enabled, the network cameras receive an IP address according to the configuration in

the network router. There are also options for setting up notification of changes in the IP address, and for using the AXIS

Internet Dynamic DNS Service. For more information on setting the IP address, please see the online help .

Network Settings

Click Vie

w for an overview of the IP configuration of the network camera.

IPv4 Address Configuration

Enable IPv4 - Check to enable IPv4.

Obtain IP address via DHCP - Dynamic Host Configuration Protocol (DHCP) is a p

rotocol that lets network administrators

centrally manage and automate the assignment of IP addresses on a network. DHCP is enabled by default. Although a DHCP

server is mostly used to set an IP address dynamically, it is also possible to use it to set a static, known IP address for a

particular MAC address.

Note:

DHCP should only

be enabled if using dynamic IP address notification, or if your DHCP server can update a DNS server,

which then allows you to access the network camera by name (host name). If DHCP is enabled and you cannot access

the unit, run AXIS IP Utility to search the network for connected Axis products or reset the network camera to factory

default settings and then perform the installation again.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 53 54

Commentaires sur ces manuels

Pas de commentaire

Axis Q6032-E Manuel d'utilisateur Page 31

Commentaires sur ces manuels

Produits connexes et manuels pour Caméras de sécurité Axis Q6032-E