Axis P5534-E Manuel d'utilisateur télécharger pdf (Page 7)

AXIS P5532-E/P5534-E - Accessing the Camera

Accessing the Camera

To install the network camera, refer to the Installation Guide supplied with your product.

The network camera can be used with most operating systems and

browsers. The recommended browsers are Internet Explorer

with Windows, Safari with Macintosh and Firefox with other operating systems. See

Technical Specifications,

on page 45.

Notes:

• To view streaming video in Microsoft Internet Explorer, set

your browser to allow ActiveX controls and install AXIS

Media Control (AMC) on your workstation.

• QuickTime

is also supported for viewing streaming H.264 video.

• If your computer restricts the use of additional software components, the camera can be configured to use a Java

applet for viewing Motion JPEG.

• The network camera includes one (1) decoder license for viewing H.264 video streams. This is automatically installed

with AMC. The administrator can disable the installation of the H.264 decoder, to prevent installation of unlicensed

copies.

Access from a browser

1. Start a browser (Internet Explorer, Firefox, Safari).

2. Enter the IP address or host name of the camera in the Location/Address field of your browser.

To access the camera from a Macintosh computer (Mac OS X), click on the Bonjour tab and select the network camera

from the drop-down list.

3. If this is the first time you are accessing the camera, see

Setting the root password,

on page 8. Otherwise enter your

user name and password, set by the administrator.

4. The camera’s Live View page appears in your browser.

Note:

The layout of the Live View page may have been customized to specific requirements. Consequently, some of the

examples and functions featured here may differ from those displayed on your own Live View page.

Access from the Internet

Once connected, the camera is accessible on your local network (LAN). To access the camera from the Internet you must

configure your broadband router to allow incoming data traffic to the camera. To do this, enable the NAT-traversal feature,

which will attempt to automatically configure the router to allow access to the camera. This is enabled from Setup > System

Options > Network > TCP/IP Advanced.

For more information, please see

NAT traversal (port mapping) for IPv4

, on page 34. See also AXIS Internet Dynamic DNS

Service at www.axiscam.net For Technical notes on this and other topics, visit the Axis Support web at www.axis.com/techsup

1 2 3 4 5 6 7 8 9 10 11 12 ... 54 55

Pas de commentaire

Axis P5534-E Manuel d'utilisateur Page 7