Axis P5534-E Manuel d'utilisateur télécharger pdf (Page 20)

AXIS P5532-E/P5534-E - PTZ (Pan Tilt Zoom)

PTZ (Pan Tilt Zoom)

Preset Positions

A preset position is a pre-defined camera

view than can be used to quickly move the

camera to a specific location.

From Preset Position

Setup, use the Pan,

Tilt and Zoom (PTZ) controls to steer the

camera view to the required position.

When satisfied with the camera's position,

enter a descriptive name and click Add.

The camera position, iris and focus

settings are then saved as a preset

position.

This position can be assumed at

any time,

by selecting the preset's name from the

Available positions drop-down list. Preset

positions can be selected in Live View

page, from Event Types, Guard Tour and in the Gatekeeper.

One position can be set as the Home position, which

is readily accessible by clicking the Home button in both the Preset

Positions window and the Live View window. The name will have (H) added, for example, Entrance (H).

The network camera can also be configured to return to the Home position wh

en the camera has been inactive for a specified

length of time. Enter the length of time in the field Return to home when inactive and click Save. Setting the time to zero

prevents the camera from automatically returning to the Home position.

The preset position name can be includ

ed in the overlay image text, see

Overlay Settings,

on page 14.

Guard Tour

A guard tour displays the video stream from different preset positions, one-by-one, in a pre-determined order or randomly,

and for configurable time periods. The guard tour will keep running after the user has logged off or closed the browser.

Note:

The pause between

guard tour runs must be set to at least 10 minutes.

OSDI Zones

On-Screen Direction Indicator (OSDI) Zones can be included in the overlay text (see page 14) to aid the user to navigate the

camera. Each OSDI Zone is set up with coor

dinates and a descriptive name.

The camera uses the coordinates of the center of the image

to set the lower left and upper right zone areas. First navigate to

where you would like the lowermost left point of the OSDI Zone to be located. By clicking Get the coordinates are set. Proceed

to where the upper right point of the zone should be located and click its Get button. Give the zone a descriptive name and

click OK.

To include the name of the OSDI Zone in the overlay text, go to Video > Video St

ream > Overlay Settings. Check the Include

text box and enter the modifier #L in the field. See File Naming & Date/Time Formats in the online help for more

information about modifiers.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 54 55

Commentaires sur ces manuels

Pas de commentaire

Axis P5534-E Manuel d'utilisateur Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Caméras de sécurité Axis P5534-E