Axis M3203 Guide d'installation télécharger pdf (Page 8)

Page 8 AXIS M32 Series Installation Guide

AXIS IP Utility - single camera/small installation

AXIS IP Utility automatically discovers and displays Axis devices on your network. The application

can also be used to manually assign a static IP address.

Note that the computer running AXIS IP Utility must be on the same network segment (physical

subnet) as the AXIS M32 Series.

Automatic discovery

1. Check that the AXIS M32 Series is connected to the network and that power has been applied.

2. Start AXIS IP Utility.

3. When the camera appears in the window, double-click it to open its home page.

4. See page 10 for instructions on how to assign the password.

Assign the IP address manually (optional)

1. Acquire an unused IP address on the same network segment as your computer.

2. Select the AXIS M32 Series network camera in the list.

3. Click the button Assign new IP address to the selected device and enter the IP address.

4. Click the Assign button and follow the on-screen instructions. Note that the camera must be

restarted within 2 minutes for the new IP address to be set.

5. Click the Home Page button to access the camera’s web pages.

6. See page 10 for instructions on how to set the password.

Note:

AXIS M3203-V and AXIS M3204-V will display in AXIS IP Utility as AXIS M3203 and AXIS

M3204.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 65 66

Pas de commentaire

Axis M3203 Guide d'installation Page 8