Axis AXIS USB Manuel d'utilisateur télécharger pdf (Page 17)

Basic Installation

AXIS OfficeBasic USB & AXIS OfficeBasic Parallel User’s Manual 17

3. If the host returns Reply from 192.168.3.191 ... or a similar

message, the IP address has been set successfully.

Interrupt the “ping -t” loop by pressing CTRL+C on your keyboard.

If the host returns Request timed out you need to reboot the print

server and perform steps 1-3 above again. Rebooting the print server is done

by disconnecting and then re-connecting the print server’s Power Adapter.

4. Log in to the print server’s Web pages (see “Using a Web Browser for Print

Server Management” on page 42), select Admin | Network Settings |

Detailed View | TCP/IP Network and define the Default Router and Subnet

Mask.

You have now set the IP address of the print server. Continue to “Adding

a Network Printer to your Workstation” on page 18.

Note:

Set the IP Address

with ARP in Mac OS X

Follow the instructions below to set the IP address using arp/ping in

Macintosh

1. Open a Terminal and write:

Example

2. Restart the print server by disconnecting and then re-connecting the Power

Adapter.

3. If the host returns psname is alive... or a similar message, the

IP address has been set successfully.

If the host returns Request timed out you need to reboot the print

server and perform steps 1-3 above again. Rebooting the print server is done

by disconnecting and then re-connecting the print server’s Power Adapter.

4. Log in to the print server’s Web pages (see “Using a Web Browser for Print

Server Management” on page 42), select Admin | Network Settings |

Detailed View | TCP/IP Network and define the Default Router and Subnet

Mask.

You have now successfully set the IP address of the print server. Continue

to “Adding a Network Printer to your Workstation” on page 18.

• When you execute the ping command for the first time, you will experience a significantly

longer response time than is usual

• The ability to set the IP address with ARP and PING will only be enabled the first 10

minutes after restarting the print server.

arp -s <IP address> <Ethernet address>

ping <IP address>

arp -s 192.168.3.191 00:40:8c:10:00:86

ping 192.168.3.191

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 70 71

Pas de commentaire

Axis AXIS USB Manuel d'utilisateur Page 17