Axis Network Camera AXIS 221 Manuel d'utilisateur télécharger pdf (Page 11)

AXIS 221/223M Installation Guide Page 11

ENGLISH

Setting the IP address with ARP/Ping

1. Acquire an IP address on the same network segment your computer is connected to.

2. Locate the serial number (S/N) on the AXIS 221/223M product label.

3. Open a Command Prompt on your computer and enter the following commands

(appropriate for your operating system):

4. Check that the network cable is connected to the camera. Start/restart the camera by

disconnecting and reconnecting power.

5. Close the Command prompt when you see ‘Reply from 192.168.0.125: ...’ or similar.

6. Start your browser, type in http://<IP address> in the Location/Address field and press

Enter on your keyboard.

7. See page 12 for instructions on how to set the password.

Notes:

• The ARP/Ping command must be issued within 2 minutes of connecting power to the camera.

• To open a command prompt in Windows: from the Start menu, select Run... and type cmd (or command in

Windows 98/ME). Click OK.

• To use the ARP command on a Mac OS X, use the Terminal utility, which is found under Application > Utilities.

Windows syntax:

arp -s <IP Address> <Serial Number>

ping -l 408 -t <IP Address>

Windows example:

arp -s 192.168.0.125 00-40-8c-18-10-00

ping -l 408 -t 192.168.0.125

UNIX/Linux/Mac syntax:

arp -s <IP Address> <Serial Number> temp

ping -s 408 <IP Address>

UNIX/Linux/Mac example:

arp -s 192.168.0.125 00:40:8c:18:10:00 temp

ping -s 408 192.168.0.125

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 63 64

Pas de commentaire

Axis Network Camera AXIS 221 Manuel d'utilisateur Page 11