Axis P1344-E Guide d'installation télécharger pdf (Page 8)

Page 8 AXIS P13-E Network Camera Series Installation Guide

Install the hardware

The instructions below describe the installation of AXIS P1343-E/P1344-E/P1346-E/P1347-E.

Prepare the network cable

The provided network cable can be connected in several ways. The first option is to use the cable as

is, with the pre-mounted rubber gasket.

The second option is to use the provided plastic M20 cable gland, which must be used to achieve an

IP66 rating. Using any other cable gland may cause water to seep in and damage the camera.

If a cable other than the provided cable is used, you need to prepare a network cable with a gasket.

Gently force the cable through the gasket provided and attach a network connector. It may be

necessary to pierce a hole in the gasket with the supplied screwdriver.

Notes:

• Do not force the network connector into the gasket.

• Do not pierce the gasket with a knife or other sharp object.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 129 130

Pas de commentaire

Axis P1344-E Guide d'installation Page 8