Axis OfficeBasic USB Wireless Guide de l'utilisateur télécharger pdf (Page 22)

ENGLISH

Print Server Management Using the Reset

Button

The reset button can be used for several operations:

Print a test page:

1. Verify that the DIP switch is on “Nor.”

2. Hold down the reset button for 5 seconds. The test page will be

printed on the connected printer.

Reset:

1. Verify that the DIP switch is on “Nor.”

2. Press the reset button once.

Perform a Factory Default:

1. Verify that the DIP switch is on “Nor.”

2. Disconnect the external power supply.

3. Hold down the reset button and reconnect the external power

supply.

4. Wait until the orange and green LED indicators have blinked

twice simultaneously.

5. Release the reset button.

6. The print server will restart.

The test page displays information about e.g. the print server’s IP

address, MAC address, subnet mask, default gateway.

WARNING! This will restart the print server and stop all on-going and

pending print jobs!

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 115 116

Pas de commentaire

Axis OfficeBasic USB Wireless Guide de l'utilisateur Page 22