Axis AXIS USB Manuel d'utilisateur télécharger pdf (Page 15)

2.2.8 Mk2/4 USB connector

The Mk2/4 USB CNC controller connects to computers via the USB port. The port uses the USB 2.x

standard.

2.2.9 Mk2/4 Power terminal

The controller should be powered with an external power supply.

Mk2/4 - 4 Axis controller hardware requires 8 - 24V DC supply

Power supply should be at least 200mA.

2.2.10 Mk2/4 LED indicators

The user is provided with helpful feedback and live ‘status’ information via on-board LED indicators.

There are four indicators.

Power: Lights when the controller is powered.

USB Conn: Lights when controller is connected to a USB Port

USB Up: Lights when USB signal is ‘good’.

Status: Blinks to indicate controller function is ‘good’.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 24 25

Pas de commentaire

Axis AXIS USB Manuel d'utilisateur Page 15