Axis Q7414 Guide d'installation télécharger pdf (Page 13)

AXIS Q7414 Installation Guide Page 13

ENGLISH

Set the IP address with ARP/Ping

1. Acquire 4 IP addresses on the same network segment your computer is connected to.

2. Locate the 4 serial numbers (S/N) on the AXIS Q7414 label.

3. Open a command prompt on your computer and enter the following commands:

4. Check that the network cable is connected to AXIS Q7414 and then start/restart the product, by

disconnecting and reconnecting power.

5. Close the command prompt when you see ‘Reply from 192.168.0.125:...’ or similar.

6. Repeat steps 3, 4 and 5 for the remaining video inputs.

7. In your browser, type in http://<IP address> in the Location/Address field and press Enter on

your keyboard.

Notes:

• To open a command prompt in Windows: from the Start menu, select Run... and type cmd. Click OK.

• To use the ARP command in Windows 7/ Windows Vista, right-click the command prompt icon and

select Run as administrator.

• To use the ARP command on a Mac OS X, use the Terminal utility in Application > Utilities.

Windows syntax Windows example

arp -s <IP Address> <Serial Number>

ping -l 408 -t <IP Address>

arp -s 192.168.0.125 00-40-8c-18-10-00

ping -l 408 -t 192.168.0.125

UNIX/Linux/Mac syntax UNIX/Linux/Mac example

arp -s <IP Address> <Serial Number> temp

ping -s 408 <IP Address>

arp -s 192.168.0.125 00:40:8c:18:10:00 temp

ping -s 408 192.168.0.125

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 89 90

Pas de commentaire

Axis Q7414 Guide d'installation Page 13