Axis P3364-LV Guide d'installation télécharger pdf (Page 8)

Page 8 AXIS P33 Network Camera Installation Guide

Access the video stream

Use the tools provided on the Installation and Management Software CD to assign an IP address,

set the password and access the video stream. This information is also available from the support

pages on www.axis.com/techsup.

Adjust the Lens

Open the Live View page in the web interface and make the following adjustments to the camera:

1. Loosen the locking screw.

2. Turn the lens holder to the desired position.

3. Turn the lens to ensure the lines on either side of the lens are aligned horizontally.

Note:

Ensure that the mark on the lens cover, between the horizontal lines, is facing up.

4. Once satisfied, gently tighten the locking screw to secure the camera’s position.

5. Open the Focus Adjustment page in the Web interface under Setup > Basic Setup > Focus &

Zoom, and follow the on-screen instructions. Use the image window to adjust the zoom and

focus. See the online help files for more information.

Note:

• Due to the dome’s refraction, the image may appear slightly out of focus once the dome has been placed.

To correct this go to the Focus Adjustment page in the Web interface under Setup > Basic Setup >

Focus & Zoom, and adjust the focus again.

• When the zoom and focus are adjusted, the IR illumination is automatically aligned to the defined angle

of view.

Warning! Adjusting the focus and zoom manually can damage the lens.

Locking screw

Lens holder

Lens

(Horizontal) line

Mark

Optical shield

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 53 54

Pas de commentaire

Axis P3364-LV Guide d'installation Page 8