Axis M5013 Manuel d'utilisateur télécharger pdf (Page 24)

AXIS M5013 PTZ Dome Network Camera

Events

4. Set the Activation Time parameters (24h clock) for the event. For example, select Recurrence pattern and let the event

start on Sundays at 13.00 with a duration of 12 hours.

5. Set the When Activated parameters, that is, deﬁne what the product should do when the event is activated. To upload

images, select Save stream and enter the required information. See

Save stream

6. Click OK to save the e vent.

Save stream

To upload images to an FTP or HTTP server, save the video stream to the SD card or send images by email, check the Save stream box.

Pre-trigger and post-trigger buffers are useful when checking to see what happened immedia tely before and after a t rigger. All

uploaded images are JPEG images.

Image frequency - Set the image frequency to a desired frame rate. The frame rate will be the best possible, but might not be as

high as speciﬁed, especially if uploading via a slow connection.

Include pre-trigger buffer - Images stored internally in the product from the time immediately preceding the trigger . Check the box

to enable the pre-trigger buffer and specify the buffer length in seconds, minutes or hours.

Include post-trigger buffer - Images store d internally in the product from the time immediately after the trigger. Check the box to

enable the post-trigger buffer and specify the buffer leng th in seconds, minutes or hours.

Note

• Pre-trigger and post-trigger buffers will be lost if the connection to the event server fails.

• The maximum length of the pre-/post-trigger buffer depends on the video image size and selected frame rate.

• If the pre- or post-buffer is too large for the product’s internal memory, the frame rate is reduced and individual images

may be missing. If this occurs, an entry is created in the product’s log ﬁle.

Continue image upload (unbuffered) - Upload video images for a ﬁxed length of time or for as long as the trigger is active.

Select type - Upload images to an FTP or HTTP server, s end images by email or save the v ideo stream to the SD card.

Create folder - Images uploaded to FTP and HTTP servers c an be save d to designated folders. Folders can, for example, be named

using the current date and time, see

File Naming & Date/Time Formats

in the online help.

Base ﬁle name - Used to name all uploaded images. Add a sufﬁxoruseyourownﬁle format to give the images unique names, see

File Naming & Date/Time Formats

intheonlinehelp.

Use stream proﬁle - Select the stream proﬁle to upload, send as email or save to the SD card. When saving to the SD card, the video

format must ﬁrst be selected. For information on stream proﬁles, see

Stream Proﬁles, on page 15

Motion detection

Motiondetectionisusedtogenerateanalarmwhenevermovementoccurs(orstops)intheview.Upto10IncludeandExclude

windows can be conﬁgured:

• Include w indows — target speciﬁc areas within the whole video image

• Exclude windows —deﬁne areas within an Include window that should be ignored (areas outside Include w indows

are automatically ignore d)

Once conﬁgured, the motion detection windows appear in the list of available triggers for triggered events. See

Set up a triggered

event, on page 23

Note

Using the motion detection feature may decrease the product’s overall performance.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 45 46

Commentaires sur ces manuels

Pas de commentaire

Axis M5013 Manuel d'utilisateur Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Caméras de sécurité Axis M5013