Axis AXIS USB Manuel d'utilisateur télécharger pdf (Page 42)

Configuration Possibilities

42 AXIS OfficeBasic USB User’s Manual

Section 7 Configuration Possibilities

This section describes some special features offered by the AXIS

OfficeBasic USB:

Autodetect Printer Type, on page 42

AutoIP, on page 42

Network Speed, on page 42

Autodetect Printer Type

The print server can automatically detect the type of printer you are using

if you enable Autodetect Printer Type. The print server can then

recognize Epson and Hewlett Packard InkJet printers. Most Epson and

Hewlett Packard InkJet printers that have Mac OS printer drivers for

network printing are supported. If Autodetect Printer Type is disabled,

the AppleTalk printer type has to be specified manually in the print

server. For Epson InkJets it would be "EPSONLQ2" and for HP InkJets it

would be "DeskWriter". If the print server does not recognize the

connected printer the default setting, "LaserWriter" will be used as printer

type. "LaserWriter" is the recommended setting to be used with all

PostScript printers.

To enable Autodetect Printer Type, log in to your print server’s Web

interface and select Admin | Network Settings | Detailed View |

Macintosh | Auto Detect Printer Type | Yes.

See the Help pages in the print server’s Web interface for details.

AutoIP

In the absence of an IP address management mechanism such as DHCP,

the print server will receive a temporary IP address automatically over

AutoIP, a method which enables the host to automatically take a linklocal

IPv4 address. AutoIP is supported by Windows 98, Me, 2000, XP and Mac

OS version 8.5 or higher.

Network Speed

With the Network Speed parameter you can manually specify the speed at

which you will send and receive network packages. You can change the

Network Speed setting to correspond to the type of network you are using

(10 or 100 Mbit).

To change the Network Speed in an Ethernet network, log in to the print

server’s internal Web pages and click Admin | General Settings =>

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 60 61

Pas de commentaire

Axis AXIS USB Manuel d'utilisateur Page 42