Axis 5670e Manuel d'utilisateur télécharger pdf (Page 92)

Section 5: Setting Up - IBM Mainframe (zSeries) AXIS 5570e/AXIS 5670e User’s Manual

The following paragraphs describe the JES3 initialization statements

shown above, which are typical of the JES3 statements used with

PSF. For more detailed descriptions of all JES3 initialization

statements, refer to the JES3 initialization and tuning publication for

your operating system.

FSSDEF Statement:

The FSSDEF initialization statement is optional but recommended. If

it is omitted, JES3 generates a default FSS for the printer being

invoked.

The FSSDEF statement can contain the following parameters:

FSSDEF Statement Explanation

TYPE

Specifies that the FSS is an output writer for deferred printing. This parameter is required.

FSSNAME

Specifies the unique name of a particular FSS. This parameter is required.

PNAME

Specifies a procedure for starting a specific PSF FSS. The procedure, which must be defined before the FSS is

started, is a member of the procedure library defined by the

STCPROC parameter of the STANDARDS

statement or of the IATPLBST procedure library. Different FSSDEF initialization statements can refer to the same

startup procedure.

The

PNAME parameter specifies either a startup procedure supplied with PSF, or one of your organization’s

procedures.

SYSTEM

Specifies the JES3 processor on which the FSS is run. The name must match the NAME parameter in the

MAINPROC statement for the processor.

TERM

Specifies the way that the FSS is terminated. The parameter value YES indicates that the FSS is terminated if

the JES3 global address space is terminated by a

*RETURN or *DUMP operator command.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 376 377

Pas de commentaire

Axis 5670e Manuel d'utilisateur Page 92