Axis 250S Guide d'installation télécharger pdf (Page 5)

AXIS 250S Blade - Rack Solution Installation Guide

AXIS 250S Blade

Switch - for selecting 75 ohm video

termination (for BNC). By default set to

ON.

Bus Connector - connected to the I/O

terminal block connector at the back of the

rack.

Axis Video Server Rack

The I/O Terminal Block - the physical interface to a relay switch output and four digital

photo-coupled inputs; also providing an RS-485 interface and an RS-232 serial

connection.

Network Connector - Axis blade video servers are designed for 10 Mbps Ethernet /100

Mbps Fast Ethernet networks and connect to the network via a standard RJ 45 connector.

DC + Power 12VDC Power (output) - This connector can drive the photo coupler inputs or

other equipment such as an IR-sensor. A maximum current (for all pins) of 1000mA can be

sourced from the DC output.

Power Connector - Input power: 100-240 VAC, 50-60 Hz, 1.6A

I/O Terminal

Blocks

Network

Connectors

DC-Power

(GND)

Power

Connector

DC+Power

1 2 3 4 5 6 7 8

Pas de commentaire

Axis 250S Guide d'installation Page 5