Axis Network Camera AXIS 221 Manuel d'utilisateur télécharger pdf (Page 4)

Page 4 AXIS 221 Installation Guide

Overview

Connections

1. Connect the AXIS 221 to your network using a standard network cable.

2. Connect power, using one of the 3 supported methods listed below:

• The supplied power adapter.

• PoE (Power over Ethernet) via the network cable. This will automatically be detected if

available via the network.

• The power connector block on the rear panel. See the illustration above.

Status

indicator

Zoom puller

(Tele/wide)

Focus puller

DC-Iris

Serial number

on underside

label

DC-Iris control cable

Power adapter

connector

10-pin I/O terminal

connector

Power

Power indicator

Network indicator

Reset

button

connector

RS-232

connector

block

Network

(also PoE)

connector

DC-Iris control cable

AC AC

GND DC+

Connect DC power (7-24V) on pins 1 and 2.

Connect AC power (10-24V) on pins 2 and 3.

Rear panel

1 2 3 4 5 6 7 8 9 ... 43 44

Pas de commentaire

Axis Network Camera AXIS 221 Manuel d'utilisateur Page 4